Brick Staining DIY

brick staining diy

Brick Staining DIY

If you’ve recently had an extension, re built a wall or had some brick work repair you may have replaced some old bricks with new ones. These new bricks might stand out like a sore thumb, unless you stain them.

Fortunately for you this is pretty easy to do yourself with Liquid Weather. There’s a handy tester spray available so you can try the effects yourself on a on an area of about 0.4 square metres.

Liquid Weather Is Really Easy To Use – Just Follows These Steps

1. Make sure the surfaces to receive application are sound and dry

2. Shake or stir the product thoroughly

3. Test the solution on a small, inconspicuous patch and allow it to dry

4. After testing, if the effect is too dark dilute with clean water (up to 50%)

5. Once you have achieved the desired shade simply apply all over the area using a brush, sponge, roller or sprayer

6. After use, simply rinse brushes and equipment in water and wash hands

Before

before using liquid weather

After

After using liquid weather

Before

roof-before

After

mended-roof

Before

before using liquid weather

After

lq2a

Before

urn-before

After

urn-after